Thermo Couple Tips

Thermocouples are among the most widely used temperature sensing solutions in industrial applications. Known for their reliability, cost-effectiveness, and versatility, they offer standardised connectivity and the ability to measure across a broad temperature range. While highly efficient, achieving accuracy below ±1°C can be challenging due to inherent system limitations.

At Pozar Thermo, we specialise in the design and development of high-performance thermocouple tips engineered for precise temperature detection in demanding environments. Our thermocouple tips are compatible with multiple thermocouple types, including Type B, K, R, and S, ensuring flexibility across a wide range of metallurgical applications.

We manufacture expendable immersion thermocouple tips designed specifically for use in foundries and steel plants. These tips are integrated with spiral-wound cardboard protection tubes and are mounted onto lance pipes for safe and efficient operation.

During operation, the thermocouple tip is immersed into molten metal for approximately 4 to 6 seconds, enabling rapid and accurate temperature measurement. The generated millivolt signal is transmitted to a microprocessor-based system, where it is processed and displayed instantly on the connected digital unit.

Engineered for speed, accuracy, and durability, Pozar Thermo’s thermocouple tips support critical decision-making in high-temperature metal processing environments.

THERMOCOUPLE TIP MINI 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 1500MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.

Minitip is used especially for foundry plants
Connector type is male
Supporter type is Plastic
Accuracy: 1deg celcius
Usage: Single time used
ID/OD: 18MM/32MM

Mini

1

THERMOCOUPLE TIP MARK III 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 1500MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.

Mark III is used especially for foundry as well as Steel plants
Connector type is Female
Supporter type is Plastic
Accuracy: 1deg celcius
sage: Single time used
ID/OD: 28MM/42MM

Mark III

2

THERMOCOUPLE TIP MARK VII 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 1500MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.

Mark VII is used especially for Steel plants
Connector type is Male Female
Supporter type is plastic / ceramic as required
Accuracy: 1deg celcius
Usage: Single time used
ID/OD: 18MM/32MM
Metal Cap: M.S / AL / CU

Mark VII

3

 THERMOCOUPLE MINITIP REUASBLE 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 900MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.

Minitip is used especially for foundry plants
Connector type is male
Supporter type is Plastic
Accuracy: 1deg celcius
Usage: Can be used 3-4 times in slag free condition
ID/OD: 18MM/32MM
Metal Cap: M.S

Mini Tip Reusable

4

THERMOCOUPLE TIP ANTISPLASH / SAFETIP / MULTI DIP 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 900MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.

Brand Name: Safetip
Accuracy: 1deg celcius
Usage: Can be used 10-12 times in slag free condition and avoids spurting and splashing
ID/OD: 18MM/32MM
Safetip is used especially for foundry and Steel plants
Connector type is Mini (Male) / Mark VII (Male Female)
Supporter type is Plastic
Coating: Ceramic sleeve of 75 / 150MM as per requirement

AntiSplash

5

THERMOCOUPLE TIP BIG MULTI DIP (BMD) 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH CERAMIC SLEEVE OF 70MM.

Brand Name: BMD
Accuracy: 1deg celcius
Usage: Can be used 8-10 times in slag free condition, only used for 1 metric ton induction furnace and ladle furnace
Outer shell is Ceramic
Connector type is Mini (Male)
BMD is used especially for foundry and Steel plants

THERMOCOUPLE TIP BIG MULTI DIP (BMD)
K TYPE WITH CERAMIC SLEEVE OF 70MM

Brand Name: BMD
Accuracy: 1deg celcius
Usage: Can be used 8-10 times in slag free condition, only used for small furnace upto 1 ton
Outer shell is Ceramic
Connector type is Mini (Male)
BMD is used especially for Non- Ferrous foundry

Big MultiDip

6

Type B (Platinum / Rhodium)
Suited for high temperature measurements up to 1800°C. Unusually type B thermocouples (due to the shape of their temperature / voltage curve) give the same output at 0°C and 42°C. This makes them useless below 50°C.

Type K (Chromel / Alumel)
Type K is the 'general purpose' thermocouple. It is low cost and, owing to its popularity, it is available in a wide variety of probes. Thermocouples are available in the -200°C to +1300°C range. Sensitivity is approx 41uV/°C. Use type K unless you have a good reason not to.

Type R (Platinum / Rhodium)
Suited for high temperature measurements up to 1720°C. Low sensitivity (10uV/°C) and high cost makes them unsuitable for general purpose use.

Type S (Platinum / Rhodium)
Suited for high temperature measurements up to 1720°C. Low sensitivity (10uV/vC) and high cost makes them unsuitable for general purpose use. Due to its high stability type S is used as the standard of calibration for the melting point of gold (1064.43°C).

Technical Specifications

7

Contact us  

This is the space to share the business's contact information.